Видео

it fixed mine!!! thank you so much :)

Im sorry I watched this some years ago and I’ve been trying to find this video just so I can show people how to say “anti clockwise” 😂

Here's a related tip... I have a Northern Tool Powerhorse washer. This year it started on the first pull but then began shutting down a few minutes later. I had already confirmed that both the engine & pump oils were right in the middle of their dipstick ranges, and even gave the crankcase a couple extra squirts of oil, but even slightly over-full it still conked out. So, I shut off the fuel and pulled the bowl and main jet off the carburetor to look for dirt. Nothing. Then I pulled, cleaned and gapped the spark plug and fired it up again. Another easy start followed by dying 5 minutes later. Finally, I disconnected the low-oil sensor and it ran until the fuel tank was empty! The lesson: in less than 80 hours of use the sensor had crapped out... (Also, after running for a while the pump pushed out enough oil thru the breather tube that the oil level is now below the dipstick. I can't figure it out, because if it was a seal failure I'd have plenty of milky oil on the stick... Condensation from storage flashing to steam?)

Listen to Paul It's a bargain from I got very inspirational how to develop a business in the best way I remember it when I got my SkyVac Atom that was my step up to expand the business Paul you are Legend I wish you all the best.....!!!!!

Can’t you use a karcher pressure washer I’m 14 and looking to earn money I do cars and made 500 pound but I wanna do driveways but does karcher do the shop as it gets all the dirt of and does a great job

what a brilliant video thanks for sharing , easy to follow instruction

Thank you sir!

Thank you for this. My father didn’t teach me these things. I was just able to change the cord to the power washer I’ve been putting off!

I’d it possible to also connect the skyvac to a surface cleaner of stones ? Then I’d defiant buy one of these the power looks incredible

What if you wine the cord back wards counter clock wise but it doesn’t get tight?

I want to start a pressure washing business I’m ready financially just need help how to get customers and which chemicals to use can anyone help

Another skyvac video not showing how to clean the valley of adjoining roofs. Do you have any videos demonstrating cleaning the valleys?

do u ship to usa

Great video, informative and straight to the point. Thanks for sharing!

Now can this happen also if you over fill it ?

Were any chemicals or product used or was it just water & pressure?

Nope. Mine only cuts out when I apply water then its struggles and then stalls. Like the pump is locking up

Short and sweet. Thanks

Love my Industrial 85 and fall in love even more every time I use it. Mine doesn't have the sieve or draining tube but that is on my list to upgrade.

Would be better if the trolley was stainless steel

I've had two of the older Honda variants of these both brilliant, my new loncin Pro 20 arrived today and I can't wait to put it to work next week, cheers guys mark in particular

What do you power it with?

Thank you for the video it, helped me a lot 👍👍👍👍

so nice machine I likely for you ...

what insurances do you need

Excellent tip, saved the day! 🎉 Thank you!

This looks immense!!

Sweet

Brilliant step by step guide, thought my motor had gone before Christmas only just put the new one in and this video was a big help 😀

Hi what chemical do you use to clean resin driveways. Can I use hypo ?

I fixed my unloader valve by doing this. My set up is a little different though. But still good information thanks. 😁👌

Just bought stuff from them. Even though expensive very happy with everything and excellent customer services with rob would definitely recommend them RJ Wales

This needs to be done all over UK

If i want 15 meter height. Its possible?

I got this kit and the roof i was doing was the onky blade it didnt have lol

Is there an offical time it took to do the 76 m

What where the two main areas I could understand the second issue he said unloader stem and….

hello ! for French Customer where ThisProduct please ?

Excellent explanation, do you put oil in where the dip stick goes in or is there a seperate opening for putting oil in?

Great video! Thank you.🙏🏻

Love my interceptor, biggest issue is with the buggy frame. Its engineered completely backwards. When you push the handles the force doesn't go straight forward it goes down at an angle thru the front wheels. As such the large non swivel wheels need to be opposite the push bar. In soft ground you need two people to move the machine about. One pulling a rope and one pushing. Additionally i added four spots to tie the machine down in the truck. Thanks

How is this going to suck up any leaves or pine needles from the gutters?

How powerful would you say the Blower function is for maybe 3-4 stories.

After many years of use, the poles stick together more easily, and when I go to pack up after a job, I have had to leave two poles stuck together and left on my roof rack, to transport. I can't get them apart no matter what I do. Is there a way to prevent this happening in the future? Yes, they are very strong, but they crack easily when they are stood on.

This looks so awesome. How can I buy it?

These look great! I've had multiple people tell me a regular shop vac with extension poles should work fine for doing gutters. Is the extra power from an industrial gutter vac truly necessary? Could I purchase these poles and connect them to a regular shop vac?

UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ruclips.net/user/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ruclips.net/user/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.